What’s Inspected in a Pre-Purchase Building Inspection?
Before you buy, understand exactly what a pre-purchase building inspection covers — and what it doesn’t. Learn what inspectors check inside, outside, and around the home, so you can buy with confidence.
Why This Matters
When you're buying a property and arranging a pre-purchase building inspection as part of your due diligence, it’s crucial to understand what’s actually included in the inspection — and just as importantly, what isn’t.
This ensures you’re clear on your inspector’s scope of work and what may still be left unknown. Some inspectors may go above and beyond the standard — and when they do, it’s a bonus for the buyer, but not something you should assume by default.
According to AS 4349.1–2007 which all inspection reports must comply with, there are clear guidelines outlining what a standard inspection covers — but most buyers aren’t familiar with the fine print.
Why Knowing the Scope Matters
Too often, buyers assume a building inspection covers everything, but it’s not a crystal ball. It’s a visual snapshot of what can be reasonably seen at the time. Knowing the limits helps you:
- Ask better questions
- Avoid false assumptions
- Plan further investigations if needed (like a plumber's camera inspection, or a licensed electrician’s review)
So here’s a breakdown — plain and simple.
What's Included in a Standard Pre-Purchase Building Inspection
Under AS 4349.1, an inspector will carry out a visual, non-invasive inspection of the following key areas:
1. Interior of the Property
Inside the home, the inspector will look for issues that affect the structure, safety, or condition of finishes:
Assessed items include:
- Ceilings – Sagging, cracking, defective linings, signs of water damage or dampness
- Walls – Bulging, cracks, defective plaster or render, damp issues, movement
- Floors
- Timber – Damage, decay, uneven surfaces, spring or bounce
- Concrete – Cracks, surface wear, water damage
- Windows
- Timber – Broken glass, rot, faulty sash operation, hardware issues
- Metal-framed – Seal failure, corrosion, water staining
- Doors & Frames – Warping, binding, loose or damaged doors, faulty hardware
- Kitchen – Water damage to benches and cupboards, loose doors, leaking or faulty taps, faulty sinks, cracked or drummy tiles
- Bathrooms (incl. Ensuite, WC) –
- Leaking or unstable toilets, bidets, and taps
- Shower leaks, loose or cracked tiles, water-stained surfaces
- Damage to vanities, baths, and basins
- Laundry – Tap leaks, tile condition, ventilation, moisture damage
- Stairs – Loose or unstable treads, risers, handrails, balustrades
- Damp Problems (All Areas) – Checked for rising, falling, horizontal moisture, and condensation
These signs can reveal deeper issues such as poor construction, long-term water damage, or a lack of maintenance.
2. Roof Void (Roof Space)
Assessed items include:
- Roof Covering – Viewed from inside for visible defects
- Roof Framing – Checked for damage, decay, or poor modifications
- Sarking – Assessed for integrity (if present)
- Party Walls – Checked for continuity and signs of damage (in attached dwellings)
- Insulation – Reviewed for presence, coverage, and condition (not disturbed)
While roof voids can be difficult to access, they often reveal issues not visible from inside the home — like leaks, structural defects, or other activity.
3. Exterior of the Building
Assessed items include:
- Walls – Lintels, cladding, protective paint condition, signs of damp or missing flashings, movement signs
- Doors & Windows – Flashings, mouldings, sills, alignment
- Chimneys – Leaning, flashing condition, brickwork deterioration
- Frames & Structures – Timber or steel elements checked for movement, rust, or decay
- Stairs – Structural integrity, loose steps, safety risks
- Balconies, Decks, Verandahs & Patios – Movement, decay, safety hazards, loose railings
These areas are inspected for visible defects, safety concerns, and early signs of structural issues.
4. Roof Exterior
Assessed items include:
- Roof Coverings – Tiles, shingles, slates, and sheet roofing inspected for cracks, breaks, looseness, rust, and general deterioration
- Gables & Roof Flashing – Checked for rust, displacement, or signs of poor installation
- Skylights, Vents & Flues – Flashings inspected for integrity and potential leaks
- Valleys – Inspected for corrosion, rust, and blockages
- Guttering – Checked for rust, sagging, water pooling, or blockages
- Downpipes – Assessed for rust, disconnection, or leaks
- Eaves, Fascias & Barges – Reviewed for rot, rust, and signs of water ingress
Issues to the roof exterior can lead to serious water damage and costly repairs if not addressed— especially after storms or in older homes. Specialist trades are often recommended to further investigate/rectify.
5. Subfloor (If Accessible)
Assessed items include:
- Timber Floor – Stumps, bearers and joists inspected for deflection, cracking, spalling, modified incorrectly, and signs of deterioration and damages
- Floor Surface – Visual signs of damage, decay, or structural weakness
- Ventilation & Drainage – Subfloor checked for adequate airflow, moisture buildup, or signs of dampness
- Suspended Concrete Floors – Inspected for general deterioration
- Leaks – Visual checks to suspended plumbing services for leaks or poorly supported
The subfloor is often out of sight and difficult to access — but it tells the real story of a home. It can reveal hidden structural issues, past water damage, or ongoing moisture problems that could be costly if ignored.
6. The Site
Assessed items include:
- Car Accommodation & Outbuildings – Detached garages, carports, laundries, bathrooms, and garden sheds inspected (where applicable and accessible)
- Retaining Walls – Checked for structural function, especially those over 700mm high or supporting other structures
- Paths & Driveways – Assessed for subsidence, cracks, unevenness, and potential trip hazards
- Steps – Checked for movement, damage, and any safety concerns
- Fencing
- General fencing – Assessed for damage, deterioration, and inappropriate loading
- Swimming pool fencing – Presence and integrity, self-closing/self-latching function (Note: Not a compliance report)
- Surface Water & Drainage – Evaluated for ponding or poor drainage, especially around structures and foundations
Site conditions can affect both the functionality and safety of the property. Drainage issues or failing retaining walls can result in structural damage over time — making this part of the inspection just as important as what’s inside.
What’s Not Included in the Inspection?
It’s just as important to know what's outside the scope. A standard inspection does not include:
- Electrical wiring or appliance testing (though signs of issues may be flagged)
- Plumbing (beyond visible leaks, moisture signs, etc)
- Gas appliances and fittings
- Pools, spas, and barrier compliance
- Building code compliance or permit checks
- Invasive inspection (e.g., removing panels, furniture or drilling)
- Pest activity (unless a timber pest inspection is also arranged)
- Asbestos, lead, or hazardous materials
For a full breakdown - Click Here: What’s Not Inspected in a Pre-Purchase Building Inspection?
Final Tip
Understand your building inspection report, and don’t hesitate to ask your inspector questions. If you’re concerned about something specific — like pool compliance, illegal works, or asbestos — arrange a specialist inspection.
Need Help Finding a Building Inspector?
We connect home owners with industry-experienced building inspectors — with no less than 9 years’ building industry experience. Every inspector on our platform has their credentials verified by our team, so you can be confident you’re working with someone who knows what to look for.
