What’s NOT Inspected in a Pre-Purchase Building Inspection in Australia
Discover what’s excluded from a standard pre-purchase building inspection under AS 4349.1 in Australia. Learn the common limitations, why they matter, and how to avoid costly surprises when buying a home.
What's NOT inspected in a pre-purchase building inspection?
If you’re buying a home, a pre-purchase building inspection is one of the most important checks you can do.
But it’s equally important to understand that these inspections don’t cover everything.
In Australia, inspectors work to AS 4349.1 – 2007, which is the industry standard for pre-purchase inspections.
That standard sets clear limits on what’s included and what isn’t. You will understand what the bare minimum of a report should be, and also understand that some inspectors may do more than what is required.
Why this matters
Many buyers assume that a building inspection is a full top-to-bottom check of the property, covering every possible defect.
That’s not the case.
Pre-purchase inspections are visual and non-invasive, meaning the inspector won’t cut into walls, lift up floors, or rearrange furniture.
They’ll check what they can see and safely reach on the day, but some areas and items are excluded and may not be reported on.
If you go into the process thinking your inspector will spot everything, there still may be problems that only show up with specialist or invasive testing.
Why knowing the scope matters
When you understand what’s included and excluded, you can:
- Book extra inspections for areas that matter to you or may have been recommended by your building inspector (e.g., pools, asbestos, plumbing, electrical).
- Give you clarity and set your expectations so you better understand what value you will get from your inspector.
- Avoid disputes with the inspector over what should have been reported.
Informed clients are better positioned to understand the report and the extent of the due diligence they’re undertaking.
NOTE: Some inspectors in the industry will report on items within the excluded categories. They do this at their own risk to provide more value for their clients, to ensure they make better-informed decisions, or to better understand the issues they have within their property. No two inspection reports are always the same.
What's excluded in a standard pre-purchase building inspection
While each inspector’s agreement may vary slightly, here are the most common exclusions under AS 4349.1:
| Excluded Item | What That Means for You |
|---|---|
| Compliance or certification checks | The report will not confirm whether the property complies with today’s building codes, planning laws, local council regulations, or any Australian Standards in force at the time of inspection. It’s not a certificate of compliance or a warranty against future problems. |
| Inaccessible or unsafe areas | Any part of the property that can’t be reached safely and reasonably at the time, such as locked rooms, steep/slippery roofs, subfloors blocked by stored items, or areas affected by hazardous conditions, will not be inspected. Reasonable access is defined in AS 4349.1. Click here to know the access and limitations. |
| Concealed systems and components | Inspectors won’t open up or dismantle the building. That means no checking of underground footings, concealed damp-proof courses, hidden plumbing or wiring, framing or bracing inside walls, or any element covered by finishes. These require invasive or specialist inspections. |
| Specialist systems and appliances | Items outside the scope of a visual building inspection — such as swimming pools, solar panels, HVAC systems, electrical installations, automatic garage doors, and built-in appliances — are excluded unless agreed as an extra service. |
| Timber pests | Termites, borer, and other timber pest activity are not assessed unless you also commission a timber pest inspection to AS 4349.3. A standard building report won’t identify timber pest damage unless it’s visible and incidental to the main inspection. |
| Environmental and health hazards | The inspection won’t test for asbestos, mould, radon, lead paint, soil contamination, water potability, or hazardous chemicals. It also won’t assess environmental efficiency, BASIX/NCC environmental provisions, or energy/lighting efficiency. |
| Operation of equipment | The inspector will not operate or test fireplaces, solid fuel heaters, chimneys, swimming pool heaters, ovens, dishwashers, air conditioning, vacuum systems, or related electrical and mechanical services. |
| Adequacy of roof drainage | While visible roof and guttering defects may be noted, the inspection won’t determine the adequacy of the roof drainage system design or installation. |
| Soft furnishings and finishes | Curtains, blinds, carpets, loose floor coverings, paintwork (except external protective coatings), and decorative finishes are not assessed for condition or quality. |
| Repair cost estimates | AS 4349.1 does not require inspectors to estimate the cost of fixing defects. If estimates are provided, they are outside the standard’s scope and should be treated as guides only. |
Final Tip
A building inspection is a powerful tool, but it’s not a crystal ball.
Think of it as a section of the puzzle — use it alongside specialist reports when needed, and make sure your inspector can get easy access to every area they need to check. You’ll find any access and limitations listed in the report. Click here to learn more.
When you walk through the home yourself, or when you’re finalising contracts, take the time to check that services like plumbing, electrical, and heating are working properly. If you’re unsure, it’s worth bringing in specific trade specialists to give these areas a thorough once-over.
The more prepared you are, the more confident you’ll feel — and the fewer surprises you’ll face once you move in.
What IS inspected in a pre-purchase building report... Click here
