AUS PROPERTY REPORT logo

Building Inspections for Melbourne Apartments: What's Covered, What Changed in 2026, and Why You Still Need Your Own

general

Many Melbourne apartment buyers have heard about Victoria's new Buyer Protections Act and assumed the government now has apartment defects covered.

That assumption is risky. The Building Legislation Amendment (Buyer Protections) Act 2025 (Vic) introduces important protections for some new apartment buildings, but it does not replace a buyer's own pre-purchase building inspection. It only applies to new residential apartment buildings with a rise of more than three storeys, and its inspection process happens after the occupancy permit has been issued.

For established apartments, the Act does not apply at all.

Before you sign a contract for a Melbourne apartment, there are two separate questions to understand. First, what can a pre-purchase building inspection actually cover in a strata-titled property? Second, what does the 2025 Buyer Protections Act do, and when does it help?

The short answer is that your own inspection still matters. It is the only independent building condition check you commission before exchange, and for established apartments it may be the only direct physical inspection of the lot you are buying.

Please Note: Not all provisions of the Building Legislation Amendment (Buyer Protections) Act 2025 have fully commenced at this time. Buyers should seek advice from their legal representative regarding which protections and requirements are currently in effect.


What Does a Building Inspection Cover for an Apartment?

A standard pre-purchase building inspection for an apartment is a visual, non-invasive inspection carried out within the scope of AS 4349.1-2007, the Australian Standard for pre-purchase residential building inspections.

For a strata-titled apartment, the inspector is primarily assessing the individual lot: the unit you are proposing to buy. That usually includes visible and accessible parts of the apartment such as internal walls, ceilings, floors, doors, windows, kitchen areas, bathrooms, laundry areas, and other rooms within the lot.

The inspector will look for signs such as cracking, moisture, water staining, distortion, sagging, decay, damage, poor workmanship, unsafe conditions, and other defects visible on the day. Where the apartment has a balcony or courtyard attached to the lot, the inspector may assess visible structural condition, surface drainage, balustrades, and obvious water-related concerns within the accessible area.

The report will usually classify defects by seriousness, commonly separating major defects, minor defects, safety hazards, and maintenance items. Many inspectors provide the report within about 24 hours, although timing depends on the booking, property access, and the inspector's reporting process.

The practical rule is simple: building inspectors can inspect what they can physically see and access. For an apartment, that means your unit, not the whole building.

That still gives you valuable information. A unit inspection can identify internal water damage, movement cracks, bathroom defects, balcony deterioration, poor falls, damaged finishes, unsafe elements, and warning signs that should change how you think about the purchase. It can also tell you when a specialist should be engaged before the contract becomes unconditional.

What's included in a pre-purchase building inspection.


What a Building Inspection Cannot Cover for Apartments

The biggest difference between inspecting a house and inspecting an apartment is common property.

In an apartment building, many expensive parts of the property are not owned by the individual lot owner. External walls, the roof, the facade, lifts, stairwells, foyers, carparks, driveways, gardens, pools, gyms, fire safety systems, building-wide services, and many structural elements are usually common property controlled by the owners corporation.

A pre-purchase inspector engaged by an individual buyer generally cannot inspect the entire building. They cannot access every apartment, every service riser, the full roof area, the building facade, plant rooms, lift systems, or common-property balconies on other floors unless access is specifically available and within the agreed inspection scope.

They also cannot certify the structural integrity of the whole apartment building. They may comment on visible structural warning signs within the unit or immediately accessible adjacent areas, but that is different from a building-wide engineering assessment.

Waterproofing is another key limitation. An inspector may identify visible signs of balcony or wet-area failure within the unit, such as staining, swelling, damp readings where used, tile defects, or poor falls. They cannot confirm the condition of concealed membranes, facade systems, or the overall building envelope without specialist testing and access.

This limitation does not make the inspection pointless. It means you need to read the report for what it is. A visual non-invasive inspection of the unit and accessible areas, not a guarantee about the entire complex.

The buyer exposure is still real. Any defect in common property is a shared liability. Your lot entitlement determines what proportion of remediation costs you may pay through owners corporation levies, including special levies if the building needs major work.

That is why apartment buyers should not rely on a building inspection alone. You need the inspection for the physical condition of the apartment, and you need owners corporation due diligence to understand the building's financial and defect history.

Understand what standard building and pest inspections do not cover


The Strata Report: What It Is and Why You Need Both

A strata report, often called an owners corporation report in Victoria, is different from a building inspection. It is not a physical inspection of the apartment. It is a review of the owners corporation's records, finances, insurance, minutes, levies, disputes, and known building issues.

For a Melbourne apartment buyer, that record review can be just as important as the physical inspection.

A strata or owners corporation report may show the current financial position of the maintenance fund or sinking fund, whether special levies have already been raised, and whether there are lot-specific amounts the buyer may inherit after settlement. It may also include minutes of recent annual general meetings and committee meetings, which can reveal discussions about water ingress, combustible cladding, facade repairs, lift replacement, balcony defects, insurance problems, or major capital works.

The report may also identify insurance details and claims history, 10-year maintenance planning if available, current building permit issues, rectification orders, and active VCAT disputes involving the owners corporation.

This is information your building inspector is unlikely to know from a visual inspection of one unit.

But the strata report has its own limitation. Owners corporation records only reveal matters that have been formally recorded. If a defect exists but has not been reported, investigated, minuted, or disclosed, it may not appear. A poor strata report is a warning sign. A clean strata report is not a clean bill of health.

The two reports answer different questions.

A building inspection asks: What visible defects can be seen in the unit and accessible areas on the day?

A strata report asks: What does the owners corporation know, owe, insure, dispute, plan, and fund?

Neither replaces the other. If you are buying an apartment, ask your solicitor or conveyancer to obtain the strata or owners corporation report as part of your pre-contract due diligence, and arrange your own pre-purchase building inspection for the apartment itself.


What the Buyer Protections Act 2025 Actually Means for Apartment Buyers

The Building Legislation Amendment (Buyer Protections) Act 2025 (Vic) is important, but its scope is narrower than many buyers assume.

The main provisions commence on 1 July 2026. The Act introduces a developer bond scheme and mandatory post-occupancy inspections for new residential apartment buildings with a rise of more than three storeys. It does not apply to established apartments bought from a private seller. It also does not apply to buildings of three storeys or fewer, which are covered by a separate existing domestic building insurance framework.

Under the developer bond scheme, the developer must lodge a financial bond equal to 2% of the total build cost before an occupancy permit is issued. The bond is held as a safety net for defect rectification. Buyers of off-the-plan apartments cannot take possession until the developer has lodged the bond and the occupancy permit has been granted. If a developer takes an occupancy permit without lodging the bond, buyers can rescind their contract and recover monies paid, plus penalty interest.

The Act also introduces a new Building Assessor role as part of Victoria's proposed apartment defect and developer bond reforms. Under the framework, the developer is required to appoint and fund the Building Assessor after the occupancy permit is issued. The legislation and supporting reform material indicate that certain registered building practitioners may be eligible to undertake the role, with further requirements and approvals expected to be determined by the Building and Plumbing Commission.

The Building Assessor process happens after occupancy. The preliminary report is completed 15 to 18 months after the occupancy permit date and identifies reportable defective building work. The final report is completed 21 to 24 months after the occupancy permit date and confirms whether the defects identified earlier have been rectified.

If defects are not rectified by the final report stage, the owners corporation can apply to the Building and Plumbing Commission to access the developer bond to fund rectification.

That is a meaningful protection, but it is not a pre-purchase inspection.

The bond protects you after you have moved in. It does not protect you at exchange or settlement. The Building Assessor does not inspect before you sign the contract. Even in a new apartment building covered by the scheme, you could be living with defects for more than a year before the formal post-occupancy inspection process identifies them under the Act.

For new apartments, the scheme should be understood as a remediation funding safety net, not a guarantee that defects will not exist.

For established apartments, the point is even simpler: the Act does not apply. Your own pre-purchase building inspection remains your independent physical due diligence on the property you are buying.

There is also a separate Victorian Government proposal for mandatory vendor-commissioned pre-sale building inspections, with legislation planned for 2027. That proposal is not yet law, and it is separate from the Buyer Protections Act 2025.


Should You Still Get a Building Inspection for an Apartment?

Yes. If you are buying an apartment in Melbourne, you should arrange your own pre-purchase building inspection and obtain the relevant strata or owners corporation records.

For a new apartment, your inspection gives you an independent view before you sign or settle. It is separate from the developer-appointed Building Assessor process, which happens after occupancy and is paid for by the developer.

For an established apartment, your inspection is the main physical condition check on the property you are buying. The Buyer Protections Act does not cover the purchase, and the owners corporation report is not a substitute for looking at the apartment itself.

For off-the-plan purchases, the timing can be more complex because the property may not be complete when contracts are exchanged. Buyers should take legal advice on contract terms, defect inspection rights, settlement inspection rights, and what independent checks can be arranged before settlement.

Specialist advice may also be needed. Waterproofing concerns, high-rise structural complexity, significant cracking, older pre-2000 apartments, visible moisture, facade issues, and unusual balcony defects can justify a waterproofing consultant, structural engineer, or other specialist. A standard inspection is a starting point, not the only possible due diligence step.

The practical approach is to combine three checks: your own pre-purchase building inspection, an owners corporation records review, and specialist advice where the property or report findings justify it.


Find a Verified Inspector for an Apartment Purchase

Aus Property Report is a buyer-focused directory, not an inspection company. APR does not perform inspections or tell buyers whether to proceed with a purchase.

Every inspector on APR has been through a verification process before appearing on the platform. You can use APR to compare verified inspectors who service Melbourne apartment buyers and understand the inspection options available before you book.

Find a verified building inspector


Are you looking to buy an Apartment? Have you purchased an Appartment in Melbourne?

Share your experience.

What do strata reports typically reveal that surprises people? Any experiences with an owners corporation that seemed fine on paper but wasn't?

Leave a comment on our community forum post here: Melbourne Apartment Buyers: July 1st Buyer Protections Act

Tags

apartmentmelbournevictoriabuilding inspectionstrataowners corporationpre purchase inspectionsbuyer protections act